Thursday, January 7, 2010

I'll Have a Slice of Rasperry Tart, Please










Let's talk about food. I know, I know, I said this was a blog about knitting, but I also said it's a little about life in general... and who doesn't like food, huh? Good food. And dessert ! What kind of life would it be if we didn't have the privilege of having something ooey, gooey, sweet, and delicious sliding across our tongues?


I love to bake! I leave the main cooking to my husband and I handle the desserts. In fact, I just baked a cake last night and made some delicious homemade frosting, thank you Julia Child. (Okay, yes, I was inspired by the movie Julie & Julia, and yes, I bought the darn cookbook. But no, this will NOT turn into a cooking blog). Now where was I? Oh yes, the cake. Quite good, though a tad on the ugly side. Okay, it stuck to the baking pan. Just close your eyes and swallow. So, due to my love of all desserts, ugly or pretty, I thought it was only right to pay homage to all things sweet and delicious. You're gonna want to eat this hat. It screams raspberries! Viva la dessert! Enjoy this pattern; it's easy and super fast thanks to Debbie Bliss's Cashmerino Superchunky. I added a bit of Berrocco Zap Yarn (Eyelash) to the first 5 rows and the pompom to jazz it up a bit.








Difficulty: Beginner familiar with working in the round




Finished measurement: fits head circumference 20-23 inches




Yarn: Debble Bliss Cashmerino Superchunky - 1 ball, Berrocca Zap - enough for trip and pompom.




Needles and Notions: size 10.5 circular - 16 inch, size 10.5 straight needles, stitch markers, tapestry needle.





Holding both yarns together, cast on 60 stitches, join stitches, avoiding twisting and place marker to mark beginning.



Row 1-5 : k1p1
drop the Berrocca yarn, cutting, leaving a tail which you will weave in later.
Row 6 and all even rows: *p 5sts, with yarn in back, slip 1 st purlwise*, repeat from * to marker Row 7 and all odd rows: purl
Continue above until you've completed 20 rows - hat should be approx. 6 inches long from cast on.

Begin decrease rows:
Row 1: *p3, p2tog, p1, repeat from * to marker
Row 2: *p2, p2tog, with yarn in back, slip 1 st purlwise, repeat from * to marker
Row 3: purl
Row 4: *p1, p2tog, with yarn in back, slip 1 st purlwise, repeat from * to marker
Row 5: purl
Row 6: *p1, p2tog, with yarn in back, slip 1 st purlwise, repeat from * to marker
Row 7: *p2tog, p1*, repeat from * to marker
Row 8: p2tog
Cut yarn, leaving tail approx. 20 inch long. Slip yarn end onto tapestry needle and thread through remaining stitches, pulling tight to a close.

Make pom pom with both yarns held together. Trim to shape and attach to hat top with desired method.

Friday, January 1, 2010

Wanted: Warm hat for bald head

Alpaca Ear Flap Hat




Happy New Year! My husband has the perfect head for knitted hats. It's round and shiny and quite susceptible to the cold. He started shaving his head several years ago when nature decided hair didn't belong there anymore. So, over the course of my few years of knitting, I've tackled several beanies for him - always from patterns that were good, but didn't quite fit as well as he wanted. This hat pattern was a lot of fun to create and I got his input every step of the way. And if you haven't yet noticed, it's made from my favorite yarn - 100% baby alpaca. Guaranteed warmth and comfort.


Skill Level: Advanced Knitter

Techniques involved: knit, purl, increase, K2tog, backwards loop cast-on ( there are several video sites showing this technique - Very simple)

Yarn: Plymouth Yarn - Baby Alpaca Grande - US 10.5 needle = 3.5 sts per inch

Amount needed for project : approx. 140 yds

Needles and notions: Size 10.5 , 16" circulars and 10.5 dpn, stitch markers, stich holder, tapestry needle


Fit's large man's head - 23" circumference +/- 1-2 inches


**note ** - 10.5 straight needles can be used during creation of the ear flaps.

**note** - when increasing stitches on ear flaps, do not increase the first or last stitch unless stated. This allows for a neater, more uniform edge. Increase by knitting in front and back of same stitch.


**note** - knitting in the round creates stockinette stitch.



Directions:
Begin with earflaps:


Earflap #1
CO 6 sts


row 1 - knit
row 2 - purl
row 3 - knit, increasing 2 sts on row ( ex. K1, K in front and back of next stitch, K2, K in frontand back of next stitch, K1) = 8 stitches are now on needle.
row 4 - purl
row 5 - knit, increasing 2 sts on row
row 6 - purl
row 7 - knit, increasing 2 sts on row
row 8 - purl
row 9 - knit
row 10 -purl, increasing 2 sts on row
row 11 -knit
row 12 -purl
row 13 -knit, increasing 2 sts on row
row 14 -purl
row 15 -knit, increasing 2 sts on row
row 16 -purl
row 17 -knit, increasing 2 sts on row - 20 stitches now on needle
row 18 -purl
row 19 -knit, increasing 2 sts on row
row 20 -purl
row 21 -knit
row 22 -purl, increasing 2 sts on row
row 23 -knit
row 24 -purl
row 25 -knit, increasing 2 sts on row
row 26 -purl
row 27 -knit, increasing 2 sts on row - 28 stitches now on needle
row 28 -purl, increasing the first and last stitch in the row ( explanation: knit in front and back of first stitch, K26, knit in front and back of last stitch)

place stitches on holder.


Earflap #2

CO 6 sts
Repeat above - rows 1 - 28.
row 29 - knit, increasing the first and last stitch in the row.


If you knitted earflap #2 on straight needles, transfer to your circulars at this time.


Backwards loop cast-on 8 stitches.


Transfer earflap #1 to your circular needles. Your cast on stitches should be in the middle of the 2 earflaps. Join the earflap to the cast on stitches, knitting row 29 from above.

Backwards loop cast-on 8 stitches. Place marker to indicate beginning. Join the other earflap to these stitches by knitting. You now have a complete circle, joined. 80 sts on needle. Continue knitting in the round until hat height is approximately 4 1/2 inches long from your cast on stitches. Place 6 markers evenly around hat ( * note - of course 6 doesn't divide evenly into 80, so I placed markers at the following #s - beginning, after st#13, after st#26, after st#39, after st#52, after st#66.


Begin decreasing as follows:
all rows are knit, on rows where you k2tog, do so before each marker.


Row 1:K2tog before each marker. (decreased 6 sts)
row 2: knit
row 3: knit
row 4: K2tog before each marker. (decreased 6 sts)
row 5: K2tog before each marker. (decreased 6 sts)
row 6: knit
row 7: K2tog before each marker. (decreased 6 sts)
row 8: knit
row 9: K2tog before each marker. (decreased 6 sts) = 50 sts remain.
row 10: knit
row 11: K2tog before each marker.
row 12: K2tog before each marker.
row 13: K2tog before each marker.
row 14: K2tog before each marker.
row 15: knit
row 16: K2tog before each marker. = 20 sts remain.
row 17: knit
row 18: K2tog before each marker.
row 19: K2tog before each marker. = 8 sts remain.

remove markers - cut yarn , leaving tail and thread through remaining stitches, pulling tightly to close hole. Weave in ends.











Cut 6 lengths of yarn , approximately 24 inches each. Thread 3 pieces of yarn through each earflap tip, braiding them together to desired length and securing end with a simple knot. Cut even, leaving approx. 1 inch of yarn.